一、密閉式設計可防止溶劑揮發 ，避免因沾藥水造成容器內的污染，可節約25%左右藥水的浪費。
二 、不需經沾藥水的過程 ，可提高10%以上之工作效率，在操作中有充分的自我檢視時間。
三、腳踏開關及壓管開關之氣壓須維持在4KG/cm²左右。
四 、壓管開關內之軟管需每個月更換一次 ，屬月保養 。
五、配備可調式氣動攪拌器 ，可將容器內添加物自動攪拌均勻，避免有沉澱及濃度不均勻的現象 。
六 、若溶劑內加入三氯三聚異氰酸（B粉）強氧化劑，需在有效時間（2-4小時）內使用完 ，並且注意使用時須將攪拌器速度調慢，藥水罐及管壁上容易附着B粉 ，須每天清理。
Features :
1. The closed design can prevent the dissolution from spreading, avoid the pollution in the container caused by the dipping water, and save about 25% of the waste of the water.
2. The process of not needing to dip in medicine can improve the work efficiency by more than 10%, and there is sufficient time for self-examination during operation.
3. The air pressure of pedal opening and pressure pipe opening must be maintained at about 4KG/cm².
4.the software management within the closure of the customs shall be replaced once every month, and it shall be maintained on a monthly basis.
5.equipped with adjustable pneumatic mixer, the additives in the container can be automatically mixed evenly to avoid the phenomenon of sedimentation and unevenness.
6. If trichlorotrimeric acidocyanic acid (B powder) strong oxidant is added to the solvent, it needs to be used within the effective time (2-4 hours), and it should be noted that the speed of the mixer must be adjusted slowly when used, and B powder is easy to adhere to the wall of the medicine water tank and pipe, and it must be cleaned every day.